Need help?Do you have a question about the Kaito KA600 and is the answer not in the manual?
Power| ni-mh batteries | 3.6 V |
|---|---|
| aa alkaline batteries | 4.5 V |
| external adapter | 6.0 V |
Audio| internal speaker diameter | 66 mm |
|---|---|
| earphone diameter | 3.5 mm |
Frequency Range| fm frequency range | 87 - 108 MHz |
|---|---|
| mw(10k) frequency range | 520 - 1710 KHz |
| mw(9k) frequency range | 522 - 1710 KHz |
Weight and Dimensions| weight | 560 g |
|---|---|
| dimensions | 240 x 138 x 70 mm |
Describes how to turn the unit on and off using the power button.
Explains how to set the automatic shut-off timer for the unit.
Details the process for activating and deactivating alarm 1 and alarm 2.
Covers activating/canceling alarms and using the snooze function for 5-minute intervals.
Explains how to adjust volume and switch between FM, AM, LW, and SW bands.
Details how to select the AM tuning step between 9KHz and 10KHz.
Provides guidance on using the telescopic and internal antennas for optimal reception.
Describes the process of manually tuning into stations using the TUN knob.
Explains how the unit automatically scans and saves strong signal stations.
Guides on inputting specific FM and AM frequencies directly.
Details how to automatically store available stations using the ATS feature.
Explains how to manually or directly access stored preset stations.
Describes how to store current stations into memory addresses.
Instructions for removing a specific saved station from memory.
Procedure to clear all stored stations from the unit's memory.
Guides on how to tune into local weather radio frequencies.
Explains how to activate the alert for weather emergencies and how the unit responds.
Step-by-step instructions for setting the current date on the unit.
Procedure for setting the current time, including 12-hour format indication.
Information on viewing current temperature and humidity readings.
How to operate the built-in flashlight and reading lamp.
Details on activating and deactivating the key lock to prevent accidental button presses.
Instructions for restoring the unit to its default settings if it malfunctions.
Guidance on installing and selecting the Ni-MH battery power source.
Instructions for installing and selecting AA alkaline batteries.
Explanation of the low battery indicator and its meaning.
How to use the external AC adapter to charge the unit.
Instructions for using the hand crank dynamo to generate power and charge batteries.
Detailed steps for charging via external adapter.
Guidance on charging the unit using its solar panel.
Instructions for charging the unit's batteries using a USB connection to a PC.
Steps for using the unit to charge external devices like MP3 players or cellphones.
To Next Page
