Kaiweets KC602 - Live Detection; Performing Live Detection

Live detection
A Remove black test lead otherwise the detection sensitivity will be affected.
1. Press the (&) button to turn on the power supply of the meter. After the self-test is completed, the
meter will display “Auto” and enter the smart measurement mode.
2. Press button, set the pointer to "NCV/Live" position, and press the button to select
"Live" measurement function.
3. Insert the red probe into the "INPUT" jack and remove the black probe.
4. Contact the red probe with the conductor under test
5. When a low voltage is detected the character "—L" is displayed, the beeper emits a slow beeping
tone and the green LED lights up.
6. When measure high voltage, the "~H" character is displayed, the buzzer emits a fast beeping
sound, and the red LED indicator lights up. Under normal circumstances, the detected line is "LIVE"
line at this time.
19