Kaiweets KC602 - Meter Operation Features; Automatic Shutdown; Cancelling Auto Power Off; Calibration Procedure

Automatic shutdown
If there is no operation within 15 minutes after starting up, the meter will automatically shut down to
save battery energy.
Cancel Auto Power off
When the meter is power off, please press and hold the button, then turn on the instrument
and then release the [22] button. " (& " symbol will disappear and that means automatic switch-off
function have canceled.
Next time you restart the machine, automatic shutdown function will be reactivated again and the
display screen shows the " ()" symbol.
Note: After the automatic shutdown function s disabled, you need to manually power off the meter.
Calibration
1. The meter automatically performs a self-test when switched on and displays "CAL" in the screen,
do not press the Jaw release to open the clamp at this time.
2. The buzzer beeps "beep, beep, beep" indicate the completion of the self-test.