KAKA Industrial AP-2 User Manual

Operation Manual AP-2
KAKA
®
Industrial
- 1 -
Specifications
Model................................................AP-2
Stock No. ......................................176503
Capacity........................................ 2.0 ton
Max. opening................................195
mm
Deep Throat.................................145 mm
Worktable diameter.................
⌀155
Ram Square.............................32×32 mm
Packing Size................ 460x190x480 mm
N.W./G.W. ...................................32/33
kg
Unpacking
The ARBOR PRESS is shipped from the
manufacture in a carefully packed Carton
box. Thoroughly inspect the product upon
opening the package. After unpacking the
unit, carefully inspect for any damage that
may have occurred during transit.
If damage has occurred, shipping
damage claims must be filed with the
carrier and are the responsibility of the
user.
Check for completeness. Immediately
report missing parts to dealer.
Carefully open crate and unbolt brake
from shipping pallet and remove from
crate using heavy duty lifting equipment
such as an overhead crane.
Warning
The warnings, cautions and instructions
discussed in this instructions or situations
that could occur. It must be understood by
the operator that common sense and
caution are factors which cannot be built
into this product, but must be supplied by
the operator.
SAVE THIS MANUAL
You will need this manual for the safety
instruction,assembly instruction,
operating procedures, parts list, and
diagram. Write your invoice number on
the inside front cover. Put both your
manual and invoice in a safe, dry place for
future reference.

KAKA Industrial AP-2 Specifications

General

Brand	KAKA Industrial
Model	AP-2
Category	Power Tool
Language	English

Summary

Product Specifications

Model and Capacity

Details product model (AP-2) and its capacity (2.0 ton).

Physical Dimensions

Lists maximum opening, deep throat, worktable diameter, ram square, and packing size.

Weight Information

Provides Net Weight (N.W.) and Gross Weight (G.W.) in kilograms.

Unpacking and Initial Inspection

Unpacking Procedure

Instructions for carefully opening the carton box and inspecting the product for transit damage.

Damage Claims

Guidance on filing shipping damage claims with the carrier and reporting missing parts.

Safety Precautions

General Safety Guidelines

Covers work area cleanliness, conditions, keeping children away, and proper tool storage.

Safe Tool Operation Practices

Includes not forcing tools, using the right tool, proper attire, eye protection, and securing work.

Tool Maintenance and Alertness

Emphasizes tool care, removing keys, staying alert, and checking for damaged parts before use.

Usage and Installation

Product Usage

Details the machine's suitability for press-fitting and pulling bearings, highlighting energy efficiency.

Installation Requirements

Checks for complete parts, mounting on a hard ground or stand, and providing adequate operating space.

Pre-operation Cautions

Advises reading the manual, understanding the structure, not exceeding size limits, and keeping footing.

Operation and Maintenance

Basic Operation

Explains rotating the handle to move the blade and adjusting bolts for balance.

Daily Lubrication

Instruction to lubricate the machine daily for optimal performance and longevity.