Need help?Do you have a question about the Kali IN-5 and is the answer not in the manual?
Explains the origin of the "IN" designation for the product line, referencing California towns.
Details the coincident placement of the mid-range driver and tweeter for accurate stereo imaging.
Describes the continuous output capabilities and dynamic headroom of the IN-Series monitors.
Explains the port tube technology designed to deliver clean, tight bass without audible noise.
Details the functions of the Digital Signal Processing, including tuning, limiting, and EQ.
Discusses EQ settings designed to compensate for room boundary effects for optimal sound.
Introduces the 2nd Wave technology platform and differentiates between versions of the IN-8.
A guide to setting dip switches for various applications without consulting the full manual.
Explains that dip switches control Boundary EQ, HF/LF Trim, and RCA input power.
Details the RCA input for consumer devices and how to enable it using dip switch #8.
Describes the XLR input for professional audio devices, noting it can be used with TRS.
Describes the TRS input for professional audio devices, noting it can be used with XLR.
Explains the volume control range and Kali's recommendation to set it at +0 dB.
Instructions for connecting the power cord, noting the international power supply.
Details the function of the power switch and advises on powering off during specific conditions.
Details dip switch settings for various speaker placements to compensate for room boundary effects.
Explains how to adjust low frequency response by +2 dB or -2 dB using dip switches.
Explains how to adjust high frequency response by +2 dB or -2 dB using dip switches.
Describes the function of dip switch 8 to turn the RCA input on or off.
To Next Page
General