Need help?Do you have a question about the Kali Project Lone Pine v2 Series and is the answer not in the manual?
Explains the origin of the "LP" designation from "Project Lone Pine."
Guide to setting dip switches for application without consulting manual.
Controls Boundary EQ, HF/LF Trim, and RCA input power.
Input for consumer devices like laptops and phones, requires enabling switch #8.
Input for professional audio devices using XLR or 1/4" TRS outputs.
Input for professional audio devices using XLR or 1/4" TRS outputs.
Adjusts speaker output from -∞ to +6 dB, center detente at +0 dB recommended.
Connects the provided power cord for the international switch-mode power supply.
Powers the speaker on and off; recommended to power off during storms or disuse.
EQ settings to compensate for low frequency interactions based on speaker placement.
Adds or subtracts 2 dB from the low frequency response for personal taste or room tuning.
Adds or subtracts 2 dB from the high frequency response for personal taste or room tuning.
Turns the RCA input on or off, defaulting to OFF to prevent interference.
Checks for power, volume, cable connections, and proper RCA switch setting.
Addresses distortion caused by playing too loud or other issues.
Troubleshoots noise issues related to RCA cables, nearby electronics, or loose objects.
Guides users on how to determine if the issue lies with the speaker or signal path.
Covers defects in materials or workmanship for one year after purchase.
Kali will replace or repair defective products at their discretion, free of charge.
Contact the retailer with the original receipt showing the date of purchase.
Excludes damage from shipping, dropping, mishandling, or failure to heed warnings.
To Next Page
General