Kalkhoff Fast Pedelec - Automatic Switch-O; Battery Charge State Indicator; Measurement and Display Ranges; Power Output Indicator

II User Manual Fast Pedelec 13
4.1.8 Automatic switch-o
If you stop your Pedelec and it does not move for 10 min-
utes, the system switches o automatically. If you want to
use the assistance again, you will have to switch it back
on via the control panel.
4.1.9 Measurement and display ranges
DESCRIPTION DISPLAY RANGE
Speed 0.0 – 99.9km / h
Journey length 0.0 – 99999km
(once the distance reaches
9999.9km, this is dis-
played without a decimal
place.)
Average speed 0 – 99.9km / h
Top speed 0.0 – 99.9km / h
Total journey length 0.0 – 99999km
(once the distance reaches
9999.9km, this is dis-
played without a decimal
place.)
4.1.10 Battery charge state indicator
Battery charge state indicator
This indicator helps you save power when riding which
means you can travel rther.
The remaining battery charge is shown in 5 stages.
DISPLAY BATTERY CHARGE STATE
/('VOLJKWXSƅƅƅƅƅ 80 – 100%
/('VOLJKWXSƅƅƅƅ 60 – 80%
/('VOLJKWXSƅƅƅ 40 – 60%
/('VOLJKWXSƅƅ 20 – 40%
/('OLJKWVXSƅ 10 – 20%
1 LED ashes
{
< 10%
no display – 0%
E: Battery is empty
F: Battery is ll
4.1.11 Power output indicator
The power output indicator shows the actual power output
being requested and the actual power consumption in 6
stages (bars).
This indicator helps you save power when riding which
means you can travel rther.