Need help?Do you have a question about the Kalt Space Baron and is the answer not in the manual?
Steps for assembling the landing gear components.
Steps for assembling the tail section of the helicopter.
Installing servos, radio system, and gyro sensor.
Connecting and adjusting control linkages for various functions.
Steps to assemble and prepare the main rotor blades for flight.
Installing the main rotor head assembly onto the helicopter.
Steps for assembling the helicopter body and canopy.
Instructions for applying decals to the helicopter.
Steps for assembling the main frame components.
Steps for assembling the transmission system.
Assembling the helicopter's control system components.
Steps for assembling the engine section.
Installing the transmission and engine assembly onto the frame.
Steps to assemble the fuel tank and its associated components.
Assembling main frames with the transmission unit.
Steps for assembling the tail section of the helicopter.
Steps for assembling the main rotor head components.
Checklist of items to verify after assembly and before the initial flight.
Adjusting aileron and elevator controls for proper travel range.
Adjusting throttle linkage for full opening and closing range.
Adjusting rudder control for precise positioning and movement.
Adjusting main rotor pitch for optimal flight performance.
Essential safety guidelines and commandments for helicopter operation.
To Next Page
General