KAM KMD10 - User Manual

KMD10
product manual
www.kam.co.uk
www.kam.co.uk
Specifications
General
Frequency Response 10Hz - 60KHz +/-2db
T.H.D. 0.01% @ +4dbU/1KHz
Signal To Noise Ratio Amplifier on & DSP on ? 70dB (-2dB)
Amplifier off & DSP on ? 75dB (-2dB)
Amplifier on & DSP off ? 72dB (-2dB)
Amplifier off & DSP off ? 77dB (-2dB)
Power Dual PSU 115V/230V
Amplifier
2 x 200W RMS/2 x 400W Peak @ 8 Ohms
2 x 350W RMS/2 x 700W Peak @ 4 Ohms
Mixer
20 inputs - 6 x mic/line, 14 line
Electr
onically Balanced Inputs accept balanced or unbalanced sources
Gain Range
+10db to +44db
Mic Channel EQ Hi +/-15dB @ 12kHz
Swept Mid +/-15dB @ 100 Hz to 8kHz
Lo +/-15dB @ 80Hz
Mic Channel Lo Cut Filters 18dB per octave @ 75Hz
Line Channel EQ Hi +/-12dB @ 12kHz
Hi Mid +/-15dB @ 3kHz
Lo Mid +/-15dB @ 500Hz
Lo +/-12dB @ 80Hz
2 x Aux Send & Return switched +4dBu & -10dBV operation
Aux 1 switched Pre/Post Fade
Channel Level Faders 60mm : +7dbU to -60dbU
7 Band Graphic EQ +/-10dB @ 60Hz, 160Hz, 410Hz, 1.1kHz, 2.3kHz,
6.2kHz , 15.6kHz
Effects
A/D D/A Conversion 20BIT
Sampling Rate 46kHz
Dimensions
KMD10 535W x 410D x 185H (mm)
Weight
KMD10 18.5kg
KMD10_MANUAL_1.0 28/2/06 15:29 Page 1

KAM KMD10 Specifications