UHF 863.00 - 865.00MHz frequency band
SMT technology
Preset 16 channel PLL system
Frequency stabilisation: < ±30ppm
Dynamic range: > 100dB
Total harmonic distortion: < 0.5%
Frequency response: 40Hz-15KHz ±3dB
Power consumption: 100mA
Signal to noise ratio: > 100dB
Image & spurious rejection: > 80dB
Border upon channel rejection: > 80dB
Receiving sensitivity: 5dBuV (SINAD=30dB)
De-emphasis: 50us
4 different Kam KWM1900 kits available:
Hand held mic system | Wireless headset system | Bodypack system | Instrument/guitar bug system
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc 2012. E&OE.
To Next Page
Need help?
General
