KAM KWM1935 - User Manual

M A D E I N C H I N A
Due to continuous product development, please ensure that you have downloaded
the latest instruction manual for this product from the Kam website at www.kam.co.uk
M A N U A L V E R S I O N 1 . 0
0 1 / 0 6 / 1 2
For the latest updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc 2012. E&OE.
KWM1935/KWM1940
UHF wireless microphone systems

Summary

KWM1935 Receiver Overview

KWM1935 Front Panel Controls

Overview of controls and indicators on the front panel of the KWM1935 receiver.

KWM1935 Rear Panel Connections

Details of connections and ports on the rear panel of the KWM1935 receiver.

KWM1940 Receiver Overview

KWM1940 Front Panel Controls

Overview of controls and indicators on the front panel of the KWM1940 receiver.

KWM1940 Rear Panel Connections

Details of connections and ports on the rear panel of the KWM1940 receiver.

Microphone Transmitter Operation

Transmitter Power and Battery Management

Details on power switch, battery indicators, and battery usage for the transmitter.

Transmitter Channel Selection

Instructions for accessing and setting the channel select dip switches on the transmitter.

Receiver Usage and Setup

Connecting the Receiver

Instructions for connecting the KWM1935 and KWM1940 receivers to audio equipment.

Operating the Wireless Transmitter

Steps for turning the transmitter on, off, and using standby mode during performance.

Setting the Frequency Selection System

Transmitter Channel Configuration

Guide to setting the transmitter channel using DIP switches based on the frequency table.

Receiver Channel Configuration

Guide to setting the receiver channel for KWM1935 and KWM1940 using DIP switches.

Channel;Frequency Table

Frequency and DIP Switch Settings

Table listing available channels, their frequencies, and corresponding DIP switch settings.

Product Specifications

Technical Specifications

Detailed technical specifications including carrier frequencies, stabilization, dynamic range, and more.

KAM KWM1935 Specifications

General

Microphones Included	2
Modulation	FM
Output Power	10mW
THD	<0.5%
Frequency Bands	UHF
Channels	2
Microphone Type	Handheld
Connector	XLR
Dimensions (Microphone)	50 mm