KAM KWM1960 V2 - User Manual

MADE IN CHINA
UHF receiver Handheld microphone transmitters
16 UHF frequencies from 863.0 to 865.0 MHz Steel metal grille
Balanced output sockets (3-pin XLR) Transmitter power: 10mW
Unbalanced 6.3mm jack for mixed audio output Modulation type: FM
Twin adjustable antenna system Max deviation: ±25KHz
Frequency stabilisation: <±30ppm Spurious emission: >40dB
Dynamic range: >90dB Mic battery voltage: 3V (2 x 1.5V AA batteries)
Total harmonic distortion: <0.5% Continuous usage: 5 hours
Frequency response: 40Hz-15KHz ±3dB Working distance: 50m
S/N ratio: >90dB Dimensions: 55 x 55 x 260mm (WxDxH)
Image and spurious rejection: >80dB Bodypack transmitters
Border upon channel rejection: >80dB Easy access on/off switch / battery indicator
Receiving sensivity: 5dBuV Illuminated display
De-emphasis: 75uS Mic battery voltage: 3V (2 x 1.5V AA batteries)
Receiver power supply DC 17V 300mA Continuous usage: 5 hours
Power consumption: 5W Working distance: 50m
Dimensions: 210 x 185 x 45mm (WxDxH) Dimensions: 160 x 35 x 65mm (WxDxH)
MANUAL VERSION 1.0
10- 01- 16
Due to continuous product development, please ensure that you have downloaded
the latest instruction manual for this product from the Kam website:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc. E&OE.
KWM1960 V2
UHF wireless microphone / bodypack systems

Summary

KAM KWM1960 V2 UHF Wireless Microphone; Bodypack Systems

UHF Receiver Specifications

Details technical specifications for the UHF receiver, including frequency range, outputs, antenna system, and dimensions.

Handheld Microphone Transmitter Specifications

Details technical specifications for the handheld microphone transmitter, including power, modulation, and working distance.

Bodypack Transmitter Specifications

Details technical specifications for the bodypack transmitter, including battery, usage, and working distance.

Safety and Operating Instructions

General Safety Precautions

Provides essential safety warnings regarding electrical shock, fire hazards, ventilation, and power cable handling.

Unpacking and Handling

Instructions on careful unpacking, checking for transit damage, and proper handling of the unit and its cable.

Manufacturer and CE Declarations

Statements on compliance with RoHS, WEEE, Battery Directives, and CE declarations.

System Components Overview

Receiver Front and Rear Panels

Identifies and describes the controls and connectors on the front and rear panels of the receiver unit.

Transmitter Components

Identifies and describes the controls, displays, and battery compartments for handheld and bodypack transmitters.

Receiver Display Screen

Explains the illuminated display screen of the receiver, including battery indicators and lock status.

System Operation and Setup

Receiver Operation and Connection

Guides on connecting the receiver, performing automatic transmitter connection (ACT), and testing the audio signal.

Advanced Operation and Troubleshooting

Covers searching for free channels, adjusting transmitter power, and troubleshooting connection issues.

KAM KWM1960 V2 Specifications

General

Brand	KAM
Model	KWM1960 V2
Category	Microphone
Language	English