To Next PageTo Next PageWhy is my Kambrook Jaguar 1600W not picking up dirt?
If your Kambrook Vacuum Cleaner isn't picking up dirt, the dust bag might be full, so try emptying or replacing it. Also, the dust bag may not be installed correctly, so double-check its installation.
What to do if dust is escaping from Kambrook Vacuum Cleaner?
If dust is escaping from your Kambrook Vacuum Cleaner, make sure the dust bag is correctly installed. Also, check the hose to ensure it's properly fitted. The dust bag might also be full, so try emptying or replacing it.
General| Brand | Kambrook |
|---|---|
| Model | Jaguar 1600W |
| Category | Vacuum Cleaner |
| Language | English |
Carefully read all instructions before operation and follow safety guidelines for proper use and assembly.
Instructions for initial setup and preparation before operating the vacuum cleaner for the first time.
Explanation of how to adjust the vacuum cleaner's power level for different surfaces and tools.
Details on using specific attachments for cleaning various surfaces and hard-to-reach areas.
Guide on how to change the dust bag, including indicators and proper fitting procedures.
Instructions for cleaning and replacing the motor protection and exhaust filters.
Details on locating, cleaning, and replacing the motor protection filter.
Procedure for cleaning the exhaust filter after each use for optimal performance.
Guidance on how to clean the vacuum cleaner's outer casing using a damp cloth.
Information on ordering replacement parts like filters and dust bags.
Common issues with the vacuum cleaner and their solutions, including non-working and poor suction.
