To Next PageTo Next Page
Need help?Do you have a question about the K&H Thermo Tent and is the answer not in the manual?
Identify all tent parts and begin assembling sticks using connectors to form the frame structure.
Feed the assembled stick sets through the tent loops and secure them into the corner tubes.
Insert the heated pad's plug and cord through the floor hole and follow back panel instructions.
Machine wash the fleece cover and line dry. Wipe the tent body with a damp cloth.
K&H Pet Products warrants the product against defects for one year from the purchase date.
Return product with receipt or contact manufacturer for a return authorization number.
Place on a hard, flat, sheltered surface and plug into a 110-120V AC outlet.
The floor will feel slightly warm initially and regulate temperature automatically for energy efficiency.
Test warmth with an insulating object and decide on the preferred warming level for your pet.
Unplug, clean, and store the heated floor away when not in use.
Do not immerse cord/plug in water, use with damaged cords, or operate near children without supervision.
Do not puncture housing, use for unintended purposes, or cover with materials other than the fleece cover.
Ensure outdoor use requires a properly grounded outlet and keep the cord out of the shelter.
Clean the heated floor with a damp cloth when unplugged and ensure it is thoroughly dry before plugging in.
The K&H Thermo Tent is a specialized outdoor shelter designed to provide warmth and comfort for pets. It is intended for use in environments such as garages, porches, and barns, offering a cozy retreat for animals in colder conditions. The tent is specifically designed for animal use and should not be used by humans.
The primary function of the Thermo Tent is to create a warm and sheltered environment for pets outdoors. It achieves this through a combination of a tent structure and an integrated heated pad. The tent body provides protection from the elements, while the heated pad, placed on the floor inside, delivers consistent warmth. The heated pad is an electrical device that operates on 110-120 volt AC power and features a built-in thermostat to regulate the temperature, ensuring an energy-efficient and pet-pleasing warmth. When a pet lies on the pad, it warms to a cozy temperature, even in cold weather. The heated pad is designed to feel slightly warm to the touch initially, then cooler, and will warm up further when insulated by the pet's body.
Setting up the Thermo Tent involves a few straightforward steps. First, all parts should be identified: four connectors, six sticks, a heated pad, a fleece cover, and the main tent body. The sticks are then connected in two sets of three using the connectors. These connected stick sets are fed through loops located on the sides and top of the tent body, ensuring they form an "X" shape. Each stick is then pushed into clear tubes at the four corners of the tent to make it stand upright. Once the tent is assembled, the heated pad's plug and cord are fed through a designated hole on the bottom floor inside the tent, and the pad is laid flat on the floor. The heated pad should be placed directly on a hard, flat surface within the tent, in a sheltered area protected from direct rain or snow. It needs to be plugged into a 110-120 volt AC outlet and allowed 15 to 30 minutes to warm up and fully expand. For testing the heated floor, a blanket, pillow, or other insulating object can be placed over a part of the pad for a few minutes, after which the warmth can be felt by hand underneath the object. Before introducing the pet, users can decide which warming level they prefer, as one side of the heated floor is marked for "gentle warming comfort" and the other for "warmest comfort." The cord of the heated pad must always exit the pet's enclosure to prevent entanglement or damage. The heated pad is intended for use inside an enclosure such as a porch, shed, barn, dog house, or cat house. If used outdoors, it must be plugged into a properly grounded electrical outlet rated for outdoor use.
Maintaining the Thermo Tent is simple. The fleece cover, which goes over the heated pad, can be removed and is machine washable; it should be line dried. The tent body itself can be cleaned by wiping it with a damp cloth. For the heated floor, it should be unplugged before cleaning. It can be wiped with a damp cloth and then plugged back in once it is thoroughly dry. When storing the heated floor, it should be unplugged, cleaned, and stored away when not in use. It is crucial not to cover the heated floor with blankets or materials other than its fleece cover, as other coverings may prevent proper heat radiation and could cause failure. Users are warned not to puncture the plastic housing of the heated floor for any reason. Regular inspection of the cord and plug is advised, and if the appliance malfunctions or is damaged, it should be returned to the manufacturer for examination. The product comes with a one-year warranty covering defects and workmanship from the date of purchase, provided it has not been damaged by accident, unreasonable use, neglect, tampering, or other non-material/workmanship related causes. To exercise the warranty, the product should be returned to the place of purchase with the original purchase receipt, or to K&H Pet Products with a dated proof of purchase or original date receipt, along with a return authorization number obtained by calling customer service and a note explaining the problem.
General| Heated | Yes |
|---|---|
| Waterproof | Yes |
| Insulated | Yes |
| Heated Pad Compatibility | Yes |
| Material | Polyester |
