Kangaroo Venice Child - Getting Started: Initial Setup; Chassis Opening and Handle Adjustment; Wheel and Seat Preparation

WARNING
a
b
KANGAROO USER GUIDE
GETTING STARTED
1
Take stroller and all parts
out of the box.
Open the chassis Locate the
button at the back of the frame.
(as shown in the diagram.)
The frame will spread apart, you
may use your hands to help
spread apart.
Insert the wheels
As shown in the diagram,
starting at the back, put back
wheels on then insert the front
wheels .
Make sure you hear the click
sound when each wheel is
inserted.
Put the brake on the stroller and
Lengthen the handle before you
put the seat on.
(see adjusting handle on page 3)
Open the seat to attach to
chassis
Lift the lever located at the top
back of the seat pulling out the
bar located under the seat as
shown in the diagram.