Step 2 – Unscrew the Base from the Atomizer and Soak the OCC Coil
After you have separated the entire KangerTech Subtank Mega TC Tank from the
battery housing, you will need to remove the base from the tank. This is a very
important step in the process; Priming or Soaking the Coil. One drop at a time on
both sides, soak your atomizer coil with 2-3 drops of e-juice in both cotton air-
holes or until the cotton air-holes will not take any more e-juice. Set the atomizer
base aside and let the atomizer coil sit for 10-20 minutes before first use (this is
only necessary for new and replacement OCC Vertical Coil Heads).
To Next Page
Loading...
