EasyManua.ls Logo

Kannad 406 XS-3 GPS User Manual

Kannad 406 XS-3 GPS
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DOC07057A Ref: 0144348A
Question and Answer IconNeed help?

Do you have a question about the Kannad 406 XS-3 GPS and is the answer not in the manual?

Kannad 406 XS-3 GPS Specifications

General IconGeneral
GPSYes
Homming Signal121.5 MHz
Operating Temperature-20°C to +55°C
Frequency406 MHz
TypeEmergency Locator Beacon (ELB)
ActivationManual or automatic
WaterproofYes

Summary

Introduction to Kannad 406 XS-3 GPS

COSPAS-SARSAT System Overview

COSPAS-SARSAT is a global distress warning system operating 406.0 - 406.1 MHz frequency band.

Beacon Registration and False Alarms

National Registration Requirements

Regulations regarding registration and use of PLBs vary from nation to nation. Register beacon with national authorities.

Handling False Alarms

If activated by mistake, immediately contact SAR authorities and report beacon ID, time, and location.

Beacon Components and Functions

Details on breakable device, pushbuttons, LEDs, antennas, and protective devices.

Instructions for Use in an Emergency

Antenna Deployment and Preparation

Unfold the antenna and raise it to vertical position before activation.

Emergency Activation Procedure

Open cover, press ON button. Beacon self-tests, green LED flashes, buzzer sounds.

Optimal Placement and Orientation

Place in horizontal position in a clear area with antenna vertical, view of sky unobstructed.

Post-Activation Guidelines

Keep beacon out of water, avoid water on antenna, keep clear view of sky, keep hand away.

Stopping Beacon Transmission

Lift lower cover and press TEST button to stop transmission if instructed.

Testing and Maintenance Procedures

Performing a Self-Test

Unfold antenna, lift cover, press TEST. Check red LED for 1 or 2 blinks indicating operation status.

Test Operational Constraints

Self-test transmits 121.5 MHz signal and may only be executed during the first five minutes on any hour.

Battery Replacement Schedule

Battery pack must be replaced 6 years after manufacture by an authorized agent.

Battery Handling Warnings

Do not open, change, throw in fire, expose to high temperatures, or short circuit the battery.

Kannad 406 PLB XS-3 GPS Specifications

General Specifications

Class II, buoyant, will float, waterproof to 1 meter submersion.

Mechanical Specifications

Weight 295g (0.65 lbs); Dimensions 132 x 88 x 45 mm.

Environmental Specifications

Operating temp -20°C to +55°C; Storage temp -30°C to +70°C; 24 hrs mini. operating life.

406 MHz Satellite Transmission Specs

Frequency 406.028 MHz, Output power 5W, Phase modulation 16K0G1D, Repetition period 50s.

121.5 MHz Homing Transmitter Specs

Frequency 121.5 MHz, Power 50 mW, AM audio sweep modulation.

GPS Receiver and Battery Specs

iTrax 03 module, 12 channels, L band; LiMnO2 battery, 6 years expiration.

Warranty and Dealer Information

Warranty Period and Coverage

Warrants unit for 5 years/60 months against material/workmanship defects, excluding batteries.

Warranty Limitations

Excludes damage from accident, misuse, unauthorized service, altered serial numbers, routine checks.

Proof of Purchase Requirement

Requires proof of purchase showing date, place, serial number or installation certificate.

Distributor Details

Section for distributor information and date of purchase.

Related product manuals