EasyManuals Logo

Kannad SafeLink R10 SRS User Manual

Kannad SafeLink R10 SRS
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
4 ENX
5 SELF TEST
Quick system check and battery life test:
LONG TEST
Full system check including GPS activation and live test message transmission.
Requires a clear view of the sky.
Ensure GPS Zone on unit is not
obstructed.
Perform away from busy sea areas
where the test transmission could
confuse other AIS users.
Press and hold OFF for 10 s until 2 s
long flash.
Unit will flash every 1 s until GPS fix is
achieved.
After 1 minute a SART test message
is sent, which will be visible to all AIS
systems within range.
At the end of the test, 3 long flashes
indicate the test is successful. No
flashes indicates the test has failed.
If the Long Test fails, check the GPS
Zone has a clear view of the sky and
re-test. If the test fails a second time,
return the unit to the service centre.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kannad SafeLink R10 SRS and is the answer not in the manual?

Kannad SafeLink R10 SRS Specifications

General IconGeneral
BrandKannad
ModelSafeLink R10 SRS
CategoryMarine Safety Device
LanguageEnglish