Kanrich 915 - Page 5

Color
CCD
Mic.
White
LED
Call
Button
SPK.
SVR1
SVR2
2 sec.
915CAL Aluminum Camera with CCD
915CALM Aluminum Camera & Mifare Card Reader
The sensitive
area of card
reader
Inside View
SW1
open door time set
SVR1 MIC. Gain
SVR2 SPK. Gain
Clockwise
anticlockwise
15 sec.
+
-
In/Out System
In/Out System
N.O(Door N.O) normal open
COM(Door COM.)normal open
N.C(Door N.C)normal close
PT(PT+) door lock PT
+
-
Connect this N.C.
Point to open door.
1N4007
Rear View
Specifications :
Working Voltage : DC 15V from PH-915P
Current Consumption: Standby 110mA
Working 320mA
CCD: Color Sony 1/3” Board Camera
Resolution: 510(H) x 492(V)
Signal Noise Rate : More than 48db
Picture Pixels: 270,000 Pixels
Ilumination : 2 white LEDs
Communication Interface :
Installation Way : Flush Mounting Type or
Surface Mounting Type
Front Material : Aluminum Panel
Dimensions : 200(H)/120(W)/55(H) mm
Weights: 570 gs
Measurement: 0.07 cuft
Accessories: 2-pin white connector*1
6-pin white connector*1
N4007 *1 diode
Screw bag*1
Red
Black
Brown
Blue
Yellow
Green
Connector Explanation
Black
Blue
External connect
open door switch
Protect Purpose
Door
Lock
Power for
door lock
(DC18V)
(The power of door lock must be an independent
power, door phone power can’t share power with
door lock.)
If door lock is close, connect this point
to open door.
The sensor of
door unlock
Please connect an external power
to Mifare card reader
P14-1