To Next PageTo Next Page
Need help?Do you have a question about the Kantech IoPass SA-600 and is the answer not in the manual?
General| Model | SA-600 |
|---|---|
| Power Supply | 12 VDC |
| Maximum Number of Cards | 10, 000 |
| Maximum Number of Transactions | 50, 000 |
| Wiegand Output | Yes |
| Type | Standalone Controller |
| Input Voltage | 12 VDC |
| Operating Humidity | 0% to 90% non-condensing |
| Reader Ports | 2 |
| Inputs | 2 |
| Housing | Plastic |
General description of the IoPass stand-alone access control system, its capabilities, and models.
Lists the main functionalities and capabilities of the IoPass system, such as capacity and access modes.
Details the physical and electrical characteristics of the IoPass unit, including read range, power, and dimensions.
Instructions for unpacking, required equipment, selecting a mounting location, and mounting the unit.
Wiring instructions for connecting the reader, door locking device, exit detector, door contact, and alarm.
Procedures for connecting power to the unit and configuring Relay-1 functions.
How to enter and navigate the IoPass programming menu using master password.
Overview of default system settings and options that can be modified.
Selecting access modes and managing system passwords for security.
Procedures for adding, deleting, and viewing access and auxiliary cards.
Configuring Relay-1 (Guard, Aux, Duress) and Alarm Relay events.
Guide to setting system language, access mode, and managing passwords.
Detailed steps for enrolling, viewing, and deleting access and auxiliary cards.
Configuration for Guard, Auxiliary, and Duress functions for enhanced security.
Setting up alarms, timers, and performing factory resets.
How users gain access to secured areas using cards, PINs, or passwords.
Step-by-step instructions for arming and disarming the connected security system.
Procedures for stopping Tamper, Force Entry, and Door Ajar alarms.
