Read these instructions fully before assembly and installation of this mount. If you do not understand these directions, or have any doubts about the safety of the
installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts. Do
not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this
product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.
CAUTION
The maximum loading weight is 125 lbs (57 kg). This wall mount is intended for use only with the maximum weights indicated. Use with products heavier than the
maximum weights indicated may result in instability causing possible injury. The wall you plan to affix the Kanto
mount to must be able to support more than 5 times the weight of the television and the wall mount combined. Do not use this product for any purpose other than to
mount a flat panel TV on a vertical surface as outlined in this manual. Improper installation may cause damage
to your TV or serious injury. This product should not be mounted on steel stud walls or cinder block walls. Consult a qualified installationcontractor if you are unsure
about the type of wall you may have.
French
Thank you for choosing a Kanto Articulating Flat Panel TV Mount. The PDX680 is designed to mount a VESA suitable TV weighing up to 125 lbs (57 kg), extend nearly
24 “from your wall, rest within 2” of the wall when it is fully compressed, rotate left and right up to 85 ° (depending on the size of your TV), and tilt your TV + 15º / -
3º. You can also adjust the horizontal level ± 2 °.
Read these instructions completely before mounting and installing this bracket. If you do not understand these instructions, or have doubts about the safety of the
installation, please consult a qualified installer. Make sure there are no defective parts or missing. Do not use defective parts. Kanto cannot be held responsible for
any property damage or injuries caused by improper assembly, improper assembly, or improper handling or use of this product. materials that you are missing, or if
you are unsure if any material is defective, please contact Kanto directly through one of the methods below.
Email: support@kantoliving.com
Toll-Free: US & Canada: 1-888-848-2643 | UK: +44 800086999
WARNING The maximum loading weight is 125 lbs (57 kg). This wall mounting system is
intended for use only with the maximum weights indicated. Use with products heavier than the
maximum weights indicated may cause instability and injuries. This product should not be mounted on steel stud walls or
concrete block walls. Consult a qualified installer if you are not sure what type of wall you might have. We make every
effort to ensure that all necessary materials are included. The wall that you plan to install the Kanto bracket must be able to
support more than 5 times the weight of the television and the system. combined wall mounting. Do not use this product for any purpose
other than mounting a flat screen TV on a vertical surface, such as explained in this manual. Improper installation can cause damage
to your TV or serious injury.
Spanish Thank you for choosing the Kanto Full Motion Wall Mount.
The PDX680 has been designed to mount a television VESA compliant, with a maximum weight of 57 kg (125 lbs),
with a maximum extension of 61cm (24 ”) from the wall, allowing rotation to left and right with an angle of up to 85 ° and a TV tilt of ± 15 ° / –3 °.
You can also adjust the horizontal level ± 2 °. Please read these instructions completely before assembling and installing
this bracket. If you do not understand these instructions, or have questions Regarding installation safety, please consult a qualified installation
contractor. Make sure there are no parts defective or missing. Do not use defective parts. Kanto cannot be held
liable for property damage or injury caused by improper assembly, incorrect assembly, lifting, or improper use of this
product. If hardware is missing or if you are not sure If the part is defective, contact Kanto directly using one of the
following methods. Email: support@kantoliving.com Toll Free: US & Canada: 1-888-848-2643 | UK: +44 800086999
CAUTION The maximum load weight is 57 kg (125 lbs). This wall mount is only intended
for installations not exceeding the maximum weight indicated. If the weight of the product
exceeds that specified, it could result in an unstable installation, which it could cause injury. This product should not be mounted on steel
stud walls or concrete block walls. See to a qualified installation contractor if you are unsure of your
wall type. The wall you plan to attach the mount to Kanto must be able to support 5 times the weight of the TV itself
and the wall mount combined. Do not give this product uses other than mounting a flat screen TV on a vertical surface as
indicated in this manual. A Improper installation could cause damage to your TV or serious injury. Supplied Parts and Hardware / Matériel et les pièces
To Next Page
Loading...
