EasyManua.ls Logo

Kanto sub8 - Specifications

Kanto sub8
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
sub8 SUBWOOFER
Woofer 8” Paper Cone Driver
Nominal Impedance 4 Ohm
Sensitivity 2.83V (/1W/1m) 88 dB
Amplifier Type Class D
Power Output 125 Watts
Input Sensitivity 100 mV
Total Harmonic Distortion < 0.3%
Frequency Response 35 Hz - 175 Hz
Low-Pass Filter 40 Hz - 120 Hz
Phase Switch 0º and 180º
Inputs 1 x RCA L/R Line Level
Input Voltage / Frequency AC 100 V - 240 V 50/60 Hz (auto switching)
Standby Power Consumption < 0.5 W
Dimensions W 11”x H 11” x D 11” (280 x 280 x 280 mm)
Net Weight 17.2 lb (7.8 kg)
Gross Weight 20.5 lb (9.3 kg)
11
Supporting your digital lifestyle
This equipment is Class II
NOTICE: This appliance is labeled in accordance with European Directive 2002/96/
EC concerning waste electrical and electronic equipment (WEEE). This label indicates
that this product should not be disposed of with household waste. It should be
deposited at an appropriate facility to enable recovery and recycling.

Related product manuals