How to fix KAPSCH CAPRI 125 Radio when the speaker has no sound?
If the KAPSCH Radio speaker has no sound, first ensure the device was charged before use. Then, try increasing the volume. If that doesn't work, reselect the audio input channel. Finally, verify that all cables are correctly connected.
Why is the Bluetooth mode voice interrupted on my KAPSCH CAPRI 125 Radio?
If your KAPSCH Radio is experiencing Bluetooth mode voice interruptions, ensure that the distance between the radio and the Bluetooth device is within 10 meters. Also, make sure there are no obstructions between the radio and the Bluetooth device, or try connecting with another Bluetooth device.
What to do if the keys have no function on my KAPSCH CAPRI 125?
If your KAPSCH Radio keys have no function, try plugging in the adapter to power on the device. If that doesn't work, use a toothpick or needle to press the reset hole, and then power it on.
Why is my KAPSCH CAPRI 125 not powering on or charging?
If your KAPSCH Radio is not powering on or charging, ensure that the adapter and the host are connected correctly. Also, check the power adapter voltage and current demand.
What to do if there is failure in station scanning in DAB or FM mode on KAPSCH CAPRI 125?
If you are experiencing failure in station scanning in DAB or FM mode on your KAPSCH Radio, check if the antenna works or reset the function.
Why does my KAPSCH Radio speaker murmur?
If your KAPSCH Radio speaker is murmuring, ensure that all cables are correctly connected. If the issue persists, replace the audio cable. Also, ensure that the equipment connected to the audio cable output itself is not murmuring.
What to do if there is no sound in AUX IN mode on KAPSCH CAPRI 125?
If you experience no sound in AUX IN mode on your KAPSCH Radio, check whether the audio cable is properly connected.
How to fix Bluetooth pairing fail on KAPSCH CAPRI 125?
If Bluetooth pairing fails on your KAPSCH Radio, first check whether the machine is in pairing state. If not, long press the OK key and try pairing again. If the problem continues, pair again after reboot.
General| Sensitivity | 0.25 μV (12 dB SINAD) |
|---|---|
| Channel Spacing | 12.5 kHz / 25 kHz |
| Power Output | 5 W |
| Modulation | FM |
| Operating Temperature | -30°C to +60°C |
To Next Page