What to do if the suction power drops off suddenly in my Kärcher Vacuum Cleaner?
If the suction power of your Kärcher Vacuum Cleaner drops off suddenly, the paper filter bag might be full. Switch off the unit, empty the container, and replace the filter bag.
Why is the suction power of my Kärcher 2201 dropping off gradually?
If the suction power of your Kärcher Vacuum Cleaner is gradually decreasing, a possible cause is a blocked filter or suction hose. Inspect these parts and clean them if necessary.
How to stop my Kärcher Vacuum Cleaner from expelling dust during vacuuming?
If your Kärcher Vacuum Cleaner is expelling dust during vacuuming, the filter cartridge may be defective or improperly installed. Check the filter fitting and replace the filter cartridge if needed.
What to do if the motor of my Kärcher Vacuum Cleaner does not work?
If the motor (suction turbine) of your Kärcher Vacuum Cleaner isn't working, there may be no power supply. Check the building fuse, the mains cable, and the socket.
General| Model | 2201 |
|---|---|
| Category | Vacuum Cleaner |
| Power Consumption | 1200 W |
| Power | 1200 W |
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Cord Length | 5 m |
Assemble the container, attach casters, and fit the filter bag.
Insert mains plug and switch the cleaner on.
Do not vacuum explosive liquids, acids, or solvents; remove paper filter bag.
Unit shuts off when full; unplug immediately.
Clean filter with brush or water, then dry thoroughly before reuse.
To Next Page
