Kärcher 6.997 Series User Manual

Kärcher 6.997 Series

137 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Register and win!

www.kaercher.com

59622260 08/15

Deutsch 3

English 8

Français 13

Italiano 18

Nederlands 23

Español 28

Português 33

Dansk 38

Norsk 43

Svenska 48

Suomi 53

Ελληνικά 58

Türkçe 63

Русский 68

Magyar 73

Čeština 78

Slovenščina 83

Polski 88

Româneşte 93

Slovenčina 98

Hrvatski 103

Srpski 108

Български 113

Eesti 118

Latviešu 123

Lietuviškai 128

Українська 133

Questions and Answers:

C
Cole BryantJul 29, 2025
What to do if the indicator lamp "Dry running" lights up on my Kärcher Switch?
- M
  Mathew NelsonJul 29, 2025
  If the indicator lamp "Dry running" lights up and the Kärcher Switch pump doesn't run or suddenly stops, it could be due to a lack of water in the pump's suction area. To resolve this, remove the air from the suction area following the operating instructions. Then, press the reset key to switch on the pump for 15 seconds. If one restart isn't enough, you can press reset again. Another cause might be a blocked suction area. In this case, pull out the mains plug and clean the suction area.
P
perry23Aug 13, 2025
What to do if my Kärcher Switch pump does not switch off?
- R
  ryan44Aug 13, 2025
  If your Kärcher Switch pump does not switch off, it could be due to heavy water loss in the household water system. Check screws and taps/valves for leaks. Alternatively, the pump might be too weak. Consider using a pump with a pressure of >2.0 bar.

Kärcher 6.997 Series Specifications

General

Brand	Kärcher
Model	6.997 Series
Category	Switch
Language	English

Summary

General Information and Warranty

Proper Use Guidelines

Details the intended use of the attachment in private households and restrictions.

Environmental and Ingredient Notes

Provides guidance on recycling and directs to website for ingredient information.

Warranty Information

Outlines warranty terms and how to claim service.

Operating Symbols and Safety Instructions

Understanding Safety Symbols

Explains the meaning of 'Danger', 'Warning', and 'Caution' symbols in the manual.

General Safety Instructions

Covers electrical safety, operating near water, and supervision requirements for safe use.

Appliance Operation

Overview and Setup Procedures

Identifies components and details installation for garden or immersion pumps.

Usage and Shutdown

Explains system operation via taps and proper disconnection after use.

Maintenance and Storage

Cleaning and Maintenance

Provides cleaning instructions and confirms the appliance is maintenance-free.

Storage Guidelines

Advises storing the appliance in a frost-free area.

EC Declaration of Conformity

Troubleshooting and Specifications

Problem Solving Guide

Lists common faults, their causes, and recommended remedies for the pressure switch.

Technical Data

Provides technical specifications for the pressure switch, including voltage and pressure ratings.