Why don't the brushes rotate on my Kärcher Cleaning Equipment?
If the brushes of your Kärcher Cleaning Equipment do not rotate, reduce the contact pressure and check if the brushes are blocked by a foreign body and remove the foreign body if necessary.
What to do if the brake is damaged on my Kärcher Cleaning Equipment?
If the brake of your Kärcher Cleaning Equipment is damaged, stop driving the device and contact Customer Service.
What to do if the master module is too hot on my Kärcher Cleaning Equipment?
If the master module of your Kärcher Cleaning Equipment is too hot, set the safety switch to "0", allow the controller to cool down for at least 5 minutes, significantly reduce the brush pressure on rough ground and contact Customer Service if this occurs repeatedly.
What to do if the seat switch opened on my Kärcher Cleaning Equipment?
If the seat switch of your Kärcher Cleaning Equipment is opened, release the accelerator pedal, adjust the driver's seat to the correct body weight, relieve the driver's seat briefly so that the controller can check the function of the seat contact switch and fully load the driver's seat.
What to do if the brush pressure is not reached on my Kärcher Cleaning Equipment?
If the brush pressure of your Kärcher Cleaning Equipment is not reached, check the brushes for wear and replace if necessary and check the cleaning head functions: lower, raise.
Why is the cleaning result unsatisfactory when sweeping edges with my Kärcher Cleaning Equipment?
If the cleaning result when sweeping in the edge area with your Kärcher Cleaning Equipment is unsatisfactory, check the height adjustment of the side brushes, adjust if necessary and replace the side brushes.
Why is my Kärcher Cleaning Equipment not sweeping properly?
If the Kärcher Cleaning Equipment does not sweep properly: 1. Check the roller brush and the side brushes for wear, replace if necessary. 2. If the roller brush does not turn, check the drive belt, clean if necessary. 3. Check the function of the coarse dirt flap. 4. Check the sealing strips for wear, adjust or replace if necessary.
Why aren't the lights working on my Kärcher Cleaning Equipment?
If the optional all-round light and/or the working light of your Kärcher Cleaning Equipment do not light up, check fuse F3 and replace if necessary.
What to do if the brush drive is overloaded on my Kärcher Cleaning Equipment?
If the brush drive of your Kärcher Cleaning Equipment is overloaded, reduce the brush contact pressure and check if foreign objects (e.g. parcel tape, pieces of wood) are blocking the brushes.
What to do if the wastewater is full in my Kärcher Cleaning Equipment?
If the wastewater tank of your Kärcher Cleaning Equipment is full, empty the waste water tank.
Details regulations for proper grounding to prevent electric shock hazards.
Specifies necessary qualifications and outlines essential training for safe operation.
Operator duties, general guidelines, and driving precautions for safe use.
Procedures and requirements for device maintenance and repair.
Specifies suitable environments, applications, and device capabilities.
Information on parts, warranty, and key safety instructions.
Description of buttons, switches, and display elements on the control panel.
Instructions for installing and connecting batteries for the device.
Information on wet batteries, their care, and charging procedures.
Procedures to verify the proper functioning of parking and foot brakes.
Warnings about braking, careless driving, and filling water systems.
Procedures for adjusting the driver's seat and steering wheel for comfort.
Details on using the sweeping function and coarse dirt flap.
Using Intelligent Keys for transport, settings, and language selection.
Adjusting travel speed, program parameters, and Intelligent Keys.
Guidelines for device care, storage, and periodic maintenance tasks.
Instructions for replacing brushes and squeegee blades.
Guidance for identifying and resolving common device malfunctions.
Actions for faults shown on the display, including error codes and text.
Solutions for issues not indicated on display and Combo variant specific problems.
Key technical specifications for various device models and configurations.
To Next Page
General