English Operating Instructions
43
* Remove the screws from the electronics cover and swivel down the electronics cover with
battery charger
Accessories BR 750...
Brushes do not
rotate.
Reduce contact pressure.
Check whether the brushes are blocked by foreign objects;
if required, remove foreign objects.
If the excess current switch in the electronics module has tripped,
set the key switch to “O” and back to “I”.
Designation Part no. Description Quantity Quantity
required
for unit
Brush roller, red
(standard)
5.762-130 for maintenance clea-
ning of very dirty floors
12
Brush roller, white
(soft)
5.762-131 for polishing and for
maintenance cleaning of
sensitive floors
12
Brush roller, orange
(high/low)
5.762-132 for scrubbing of structu-
red floors (safety tiles,
etc.)
12
Brush roller, green
grit
5.762-133 for basic cleaning of
very dirty floors and for
removal of coatings (e.g.
wax, acrylates)
12
Brush roller, grey
1 mm grit
5.762-189 1 2
Pad roller shaft 4.762-188 for housing roller pads 1 2
Roller pad (white) 6.369-389 20 80
Roller pad (red) 6.369-456 for cleaning of slightly
dirty floors
20 80
Roller pad (green) 6.369-455 for cleaning of normal to
very dirty floors
20 80
Roller pad (yellow) 6.369-454 for polishing of floors 20 80
Fault
Remedial action
To Next Page