To Next PageTo Next Page
Need help?Do you have a question about the Kärcher KM 70/30 C Bp and is the answer not in the manual?
General safety advice, including warnings about danger, injury, and property damage.
Safety guidelines for handling and charging batteries to prevent risks.
Explains the intended application of the sweeper and user responsibilities.
Details prohibited uses and potential hazards associated with incorrect operation.
Lists the types of surfaces appropriate for operating the sweeper.
Instructions for safely unpacking the appliance and checking for transit damage.
Steps for assembling the sweeper, including attaching side brushes.
Essential safety guidelines to follow when handling and working with batteries.
Step-by-step guide for correctly installing and connecting the battery pack.
Procedure for safely charging the appliance battery, including indicators and time.
Instructions for safely removing the battery from the appliance for disposal or replacement.
How to adjust the pushing handle for ergonomic use and optimal control.
Guidance on selecting the correct operating mode (Sweep or Sweep Suction).
Details on operating the sweeper, including speed adjustment and brush tilt.
Instructions for setting the correct contact pressure for the roller and side brushes.
Method for effectively collecting dirt and debris using the sweeper.
Understanding the battery charge level indicators during operation.
Procedure for safely emptying the waste container after use.
Steps for properly shutting down and preparing the sweeper for longer storage.
Safety guidelines and methods for transporting the sweeper securely.
Recommendations for storing the sweeper safely in indoor locations.
Instructions for cleaning the inside and outside of the sweeper using appropriate methods.
Routine checks to perform daily to ensure proper functioning and identify wear.
Tasks for weekly maintenance, including filter cleaning and moving parts inspection.
Checks required every six months, focusing on drive belts and sealing strips.
Procedures for replacing worn parts like sealing strips, brushes, and filters.
General