Kärcher FC 3 Cordless User Manual

24 English
Cleaning rollers are contaminated or
worn.
 Clean the cleaning rollers.
or
 Replace the cleaning rollers.
The detergent has been forgotten, an
incorrect dosage is being used or the
incorrect detergent is being used
 Use only KÄRCHER detergent and
be sure to use the correct dosage.
Floor head cover not installed correctly
 Check that the floor head cover is
c
orrectly seated. For this, remove
the cover and then
fit it back in
p
lace.
Note
Slight foam formation in the floor head
during operation is normal and does
not impair functionality. Further meas-
ures are only necessary when there is
excessive foam formation (e.g. streaks
of foam on the floor).
Incorrect detergent or incorrect dosage.
 Use only KÄRCHER detergent and
be sure to use the correct dosage.
Device operation is based on the
cleaning rollers removing dirt. Dirt and
detergent residues from floor cover-
ings collect in the waste water tank.
This can lead to foam formation under
some circumstances.
 Clean the waste water tank, floor
head cover and cleaning rollers.
See chapter "Clean
ing the waste
water tank".
Se
e chapter "Cleaning the floo
r
h
ead".
See chapter "Cleaning the rollers".
Formation of foam in the floor
head and on the floor
俺
1.
2.

Kärcher FC 3 Cordless Specifications

General

Product type	Stick vacuum
Dust capacity	- L
Product color	Black, Grey, White
Dust container type	Bagless
Clean water tank capacity	0.36 L
Dirty water tank capacity	0.14 L
Removable handheld vacuum	No
Cleaning type	Wet
Vacuum air filtering	-
Working width (standard brush)	300 mm
Area cleaned per battery charge	60 m²
Power source	Battery
Charging time	4 h
Battery voltage	7.2 V
Maximum input power	- W
Vacuum brushes included	Roller brush

Weight and Dimensions

Height	1210 mm
Weight	2400 g