Kärcher FP 303 - User Manual

FP 303 Kurzanleitung / Quick start / Départ rapide
PRESS
PRESS
Vor Inbetriebname / Before startup / Avant la mise en service
Inbetriebnahme / Start up / Mise en service
PRESS
Entriegelung drücken und halten.
Stiel nach hinten ziehen, Gerät schaltet ein.
Press and hold down the unlocking key.
Pull the shaft in the rear direction. The
device is activated.
Appuyer sur le déverrouillage et le
maintenir enfoncé. Tirer le manche vers
l’arrière, l’appareil se met en service.
11
11
1
22
22
2

Summary

Before Startup and Assembly

Assembly Steps

Detailed steps for assembling the device components before initial use.

Device Activation

Startup Procedure

Steps to activate the device, including pressing a key and pulling the shaft.

Operation and Application

Thorough Vacuuming

Instructions for vacuum cleaning the floor thoroughly.

Wet Mopping

Guide for wet mopping the floor with a basic cleaner.

Apply and Dry Care Material

Steps for applying floor care product and allowing it to dry.

Polishing

Instructions for polishing the floor to achieve desired shine.

Finishing Operation

Power Down and Storage

Steps for turning off the device and preparing it for storage.

Cleaning Agents and Polishing Pads

Product Selection Guide

Guide for selecting cleaning agents and polishing pads based on floor type.

Kärcher FP 303 Specifications

General

Cord length	7 m
Product type	Floor polisher
Product color	Black, Yellow
Dust bag capacity	4 L
Power requirements	220 - 240 V, 50/60 Hz

Weight and Dimensions

Depth	385 mm
Width	339 mm
Height	1162 mm
Weight	6600 g