What to do if my Kärcher Pressure Washer spray wand leaks?
If your Kärcher Pressure Washer spray wand is leaking, make sure the spray wand is properly attached. Turn the swivel nut of the gun clockwise until the connection is tight.
What to do if water leaks from the pump of my Kärcher Pressure Washer?
If water is leaking from the pump of your Kärcher Pressure Washer (up to 10 drops per minute is permissible), first check for loose fittings and tighten them. If the thermal protection device is activated, it will auto reset; do not run the pump for more than 5 minutes without spraying.
General| Power | 6.5 HP |
|---|---|
| Weight | 57.3 lb |
| Hose Length | 25 ft |
| Working pressure | 2600 PSI |
| Nozzle Types | 0°, 25°, 40°, Soap |
| Engine | Induction motor |
Describes the color-coded quick connect nozzles for spray widths.
Details initial use, pump inspection, and pump maintenance.
Advises to carry out maintenance tasks as per manufacturer's instructions.
Instructions for cleaning decks with or without detergent.
Guidance for cleaning house siding using the pressure washer.
Procedures for cleaning patios, brick, and stone surfaces.
Steps for cleaning vehicles like cars, boats, and motorcycles.
Tips for cleaning outdoor equipment and tools.
How to clean patio and lawn furniture with the pressure washer.
General advice before cleaning and for specific surfaces.
Information on available accessories to enhance cleaning capabilities.
To Next Page
