How to fix noisy pump in Kärcher G 2650 OH?
If your Kärcher Pressure Washer pump is noisy, it might be sucking air. Check that all hoses and fittings are airtight. Turn off the machine and purge the pump by squeezing the trigger gun until a steady flow of water emerges through the nozzle.
How to fix Kärcher Pressure Washer garden hose connection leaks?
If your garden hose connection on the Kärcher Pressure Washer is leaking, tighten the fittings. If that doesn't solve the issue, insert a new washer.
General| Engine Type | OHV |
|---|---|
| Engine Displacement | 196 cc |
| Flow Rate | 500 l/h |
| Pump Type | Axial Cam |
| Maximum Pressure | 150 bar |
| Water Flow | 500 l/h |
| Power Consumption | 2.5 kW |
| Hose Length | 5 m |
Essential preliminary steps and behaviors for safe operation, including reading instructions and maintaining alertness.
Warnings related to injection, explosion, kickback, asphyxiation, fire hazards, and hot surfaces.
Diagnoses and solutions for engine not starting or low pressure, including hose and filter checks.
Addresses variable pressure, pump air intake, obstructed nozzles, and calcification issues.
Solutions for no detergent, leaks from garden hose connections, spray wand, and pump.
To Next Page
