EasyManua.ls Logo

Kärcher G 3500 Plus - Page 14

Kärcher G 3500 Plus
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Add detergent concentrate to the canister
and top with water, spray luxurious soap.
This accessory turns your pressure
washer into a personal car wash!
Adjust the rotary switch to adjust the foam
spray pressure, and get your best clean
efficiency.
Connect the Turo Nozzle to the 1/4
quick connector of high pressure gun
to use Turo Nozzle.
Certain hard surfaces (Ig.
driveways, asphalt, concrete, brick
and stone) may require more
intense cleaning to get the job done.
While you could use a 0° (pencil jet)
spray nozzle, that method can be
very time consuming.Turbo Nozzle
takes a nozzle and rotates it at
high speed, giving you the effective
cleaning power of a pencil jet but
with a wider area of cleaning. This
greatly speeds up the task of deep
cleaning hard surfaces.
High pressure in nozzle area. Risk of
injury caused by improperly locked
nozzle.
Make sure you hear the "click" when
inserting the nozzle tip into the quick
connection.
Pull the nozzle to make sure it is
seated properly before operating your
unit.
To avoid serious injury never point
spray nozzle at yourself, other
persons or animals.
The pressure can be adjusted by
changing the speed of the engine
using the throttle lever.
Turning the throttle lever to the left can
increase the speed to get more
pressure.
Turning the throttle lever to the right
can decrease the speed to get less
pressure.
When adjusting the engine throttle
to the lowest setting, do not
operate the pump. This can cause
the engine to stall due to lack of
power.
Adjusting Water Pressure
Page 14
Turbo Nozzle

Related product manuals