Need help?Do you have a question about the Kärcher HDS 6/14 C and is the answer not in the manual?
General| Cable length | 5 m |
|---|---|
| Fuel tank capacity | 15 L |
| Connected load | 3600 W |
| AC input voltage | 230 V |
| Number of phases | 1 |
| AC input frequency | 50 Hz |
| Working pressure (max) | 140 bar |
| Working pressure (min) | 30 bar |
| Heating oil/gas consumption (full load) | 3.5 kg/h |
Weight and Dimensions| Depth | 650 mm |
|---|---|
| Width | 1060 mm |
| Height | 920 mm |
| Weight | 93000 g |
Defines DANGER, WARNING, CAUTION, ATTENTION levels for user safety and potential risks.
Explains the meaning of various safety and warning symbols displayed on the machine.
Describes the function and operation of the overflow valve and pressure switches for safety.
Explains the function of the safety valve and its role in case of other component failures.
Details how the water shortage safeguard protects the burner by preventing operation without water.
Explains the function of the temperature stop to prevent overheating from exhaust gases.
Guide for connecting the spray lance, nozzle, and high-pressure hose securely using the EASY!Lock system.
Essential steps for safely refilling the fuel tank with appropriate fuel types.
Instructions for refilling the detergent tank using only Kärcher products.
Guidelines for safely connecting the appliance to the electrical power supply.
How to safely operate and disengage the trigger gun.
Procedure for safely replacing the nozzle on the spray lance.
Step-by-step guide to safely start the appliance and check operational readiness indicators.
How to adjust the working pressure and flow rate using the pump unit regulator spindle.
Safety precautions and necessary settings for operating the appliance with steam.
Detailed steps for safely shutting down the appliance, including disconnecting power.
Measures to protect the appliance from frost damage during storage, emphasizing draining water.
Troubleshooting steps when the appliance fails to start or operate correctly.
Diagnosing and resolving issues where the appliance fails to build sufficient operating pressure.
Diagnosing and resolving reasons why the burner fails to ignite or start.
To Next Page
