EasyManua.ls Logo

Kärcher K 5 Premium Smart Control - Page 5

Kärcher K 5 Premium Smart Control
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 5
몇 CAUTION
● Gun kicks back – Hold with both
hands.
● The trigger gun safety lock prevents
the spray from accidentially being
engaged. This safety feature DOES
NOT lock spray in the ON position.
ATTENTION
● This device has been designed for
use with cleaning detergents recom-
mended by the manufacturer. The
use of other cleaning detergents
may affect the operation of the de-
vice and void the warranty.
Note
● This device/appliance complies with
Part 15 of the FCC Rules and Indus-
try Canada licence-exempt RSS
standard(s).
Operation is subject to the following
two conditions:
1 This device/appliance may not
cause harmful interference, and
2 This device/appliance must accept
any interference received, including
interference that may cause unde-
sired operation.
Note
Changes or modifications made to
this equipment not expressly ap-
proved by Kärcher may void the FCC
authorization to operate this equip-
ment.
Note
● This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules. These lim-
its are designed to provide reason-
able protection against harmful
interference in a residential installa-
tion. This equipment generates, uses
and can radiate radio frequency en-
ergy and, if not installed and used in
accordance with the instructions,
may cause harmful interference to ra-
dio communications. However, there
is no guarantee that interference will
not occur in a particular installation. If
this equipment does cause harmful
interference to radio or television re-
ception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
● Reorient or relocate the receiving
antenna.
● Increase the separation between
the equipment and receiver.
● Connect the equipment into an out-
let on a circuit different from that to
which the receiver is connected.
● Consult the dealer or an experi-
enced radio/TV technician for help.