To Next PageTo Next Page
Need help?Do you have a question about the Kärcher K4 Classic and is the answer not in the manual?
General| Power | 1800 W |
|---|---|
| Flow Rate | 420 l/h |
| Hose Length | 6 m |
| Cable Length | 5 m |
| Max. inlet temperature | 40 °C |
| Area performance | 30 m²/h |
| Detergent Tank Capacity | 0.5 l |
| Pressure | 130 bar |
| Nozzles Included | Dirt Blaster |
The power switch prevents unintentional operation of the device.
The lock prevents the device from starting unintentionally.
The pressure switch turns off the pump when the lever is released.
Fit the supplied loose parts onto the device before starting up.
Screw the water connection coupling onto the water connection on the device.
Detergent can only be mixed into the jet at low pressure.
Spray detergent sparingly, let it work, then rinse.
Release and lock the high-pressure gun lever during short breaks.
Depressurize system, disconnect water, switch off, pull plug.
Completely empty the device and protect it from frost.
Ensure device is switched off and unplugged before maintenance.
Check and clean the water connection sieve for damage.
Clean the detergent filter before long periods of storage.
Check power, voltage, and cable for issues.
Check water supply, spray lance setting, and sieve.
Clean the high-pressure nozzle and check water supply.
Adjust spray lance, clean filter, and check hose for kinks.
Details on voltage, phase, frequency, power rating, and protection class.
Specifications for feed pressure, input temperature, input amount, and suction height.
Operating pressure, max permissible pressure, water flow rates, and recoil force.
Physical dimensions and typical operating weight of the device.
