To Next PageTo Next Page
Need help?Do you have a question about the Kärcher K4 Premium Power Control and is the answer not in the manual?
General| Hose length | 8 m |
|---|---|
| Cable length | 5 m |
| Power source | Electric |
| Castor wheels | Yes |
| Product color | Yellow |
| Detergent tank | No |
| LED indicators | Power |
| Pressure range | High-pressure |
| Power plug type | Type G |
| Power consumption (typical) | 1800 W |
| Recoil force | 13 N |
| Uncertainty K | 0.8 m/s² |
| Maximum pressure | 130 bar |
| Maximum flow rate | 420 l/h |
| Vibration emission | 3.2 m/s² |
| Sound pressure level | 75 dB |
| Maximum area performance | 30 m²/h |
| Maximum water temperature | 40 °C |
| Pallet width | 1200 mm |
| Pallet height | 1196 mm |
| Pallet length | 1000 mm |
| Country of origin | Italy |
| Quantity per pack | 1 pc(s) |
| Quantity per pallet | 10 pc(s) |
| UK Trade Tariff code | 84243008 |
| Master (outer) case width | 397 mm |
| Quantity per pallet layer | 5 pc(s) |
| Master (outer) case height | 513 mm |
| Master (outer) case length | 591 mm |
| Master (outer) case weight | 17071 g |
| Package weight | 17.071 kg |
| Accessories included | 1x Dirtblaster Lance, 1x Vario Power Spray Lance, 1x T 5 T-Racer |
Weight and Dimensions| Depth | 402 mm |
|---|---|
| Width | 306 mm |
| Height | 588 mm |
| Weight | 11480 g |
| Dimensions (WxDxH) | 306 x 402 x 588 mm |
Specifies voltage, phase, frequency, power rating, and protection class.
Details feed pressure, maximum temperature, and minimum input amount.
Lists operating pressure, maximum flow rates, and gun recoil force.
Provides overall dimensions and typical operating weight of the device.
Lists vibration and noise level values with their uncertainties.
States compliance with relevant EU directives for the product.
Information within the app for device installation and initial startup.
Details within the app regarding the device's areas of application.
Proper disposal of packing materials according to environmental regulations.
Guidelines for disposing of electrical appliances and their components.
Rules for cleaning with detergents and handling wastewater.
Regulations concerning the extraction of water from public waterways.
Ensuring fault-free and safe operation by using original accessories and spare parts.
Instructions to verify the completeness of the delivery upon unpacking.
Lists the components of the device as shown in Illustration A.
Lists the components of the device as shown in Illustration B.
Steps for attaching the wheels and assembling the device stand.
Instructions for mounting the storage unit for the spray lance.
Steps for attaching the transport handle to the device.
Instructions for hanging the accessory net on the device.
Routing the hose through the guide and installing the water connection coupling.
Positioning the unit and unwinding the high-pressure hose.
Inserting the hose into the gun and checking the connection.
Plugging the device into a mains socket.
Information on water source requirements and company regulations.
Recommendation to use a water filter to prevent pump damage.
Steps for connecting the garden hose to the tap and device.
Instructions for using a suction hose for water from alternative sources.
Procedure to remove air from the system before starting operation.
Understanding the pressure indicator on the high-pressure gun.
Warnings for cleaning painted surfaces and using specific tools.
Detergent is mixed into the jet only at low pressure.
Steps for attaching and using detergent bottles with the system.
Instructions for filling, attaching, and using the foam nozzle.
Method for applying detergent, letting it work, and rinsing dirt.
Storing the detergent bottle and flushing the device with clean water.
Releasing and locking the high-pressure gun lever.
Steps to safely discharge remaining pressure in the system.
Steps to disconnect the hose, water supply, and power.
Instructions for storing the device, including hose and cable management.
Steps to prevent damage to the device from frost.
Note that the device is maintenance-free.
Instructions for cleaning the sieve in the water connection.
Checks for power supply, voltage, and overload issues.
Troubleshooting for voltage drop or weak power grid.
Checks for water supply, flow rate, and dirty sieve.
Procedure for venting the device to remove air.
Instructions for cleaning the nozzle and checking water supply.
Information on normal minor leaks and severe leaks.
Checks for correct Vario Power setting and bottle connection.
Information on warranty coverage and how to contact service.
Declaration of compliance with EU basic safety and health requirements.
