Need help?Do you have a question about the Kärcher K 2 Power Control and is the answer not in the manual?
General| Flow Rate | 360 L/h |
|---|---|
| Max Water Feed Temperature | 40°C |
| Area Performance | 20 m²/h |
| Power Consumption | 1400 W |
| Voltage | 220-240 V |
| Hose Length | 5 m |
| Pressure | 110 bar |
| Motor Power | 1.4 kW |
Details DANGER, WARNING, CAUTION, ATTENTION levels, and required protective clothing/goggles.
Covers general usage, safety device integrity, and essential electric shock prevention measures.
Covers electrical cable protection, prohibited operations, jet hazards, and device checks.
Addresses water network connection requirements, detergent handling, and scalding risks.
Guidelines for maintenance, repair, storage, and safe transportation of the device.
Specifies product intended use and advises on using original accessories and spare parts.
Instructions to check contents upon unpacking and report any issues.
Guides on fitting parts, identifying components, and understanding device symbols.
Steps for first-time setup, water supply requirements, and connection warnings.
Covers pump dry run, Power Control system, and pressure level settings for various tasks.
Instructions for high-pressure cleaning, using brushes, detergents, and surface protection.
Procedures for pausing operation, safely shutting down, and managing system pressure.
Covers weight awareness, carrying, pulling, vehicle transport, and proper storage with frost protection.
Details cleaning sieve/filter, electric shock risks during maintenance, and guides for troubleshooting common issues.
Outlines the terms and conditions of the product warranty and the EU Declaration of Conformity.
Lists electrical, water, performance, dimensions, and measured technical data for the device.
To Next Page
