9
Please follow these instructions carefully for
troublefree cleaning
Use the diagram on Page 8 for reference purposes
3.2 Water Connection
The minimum length of supply hosepipe advised for maximum user
convenience is 7.5 metres with a diameter of 12.5 mm (1/2") to avoid
backpressure and any associated potential damage to your machine.
Attach your supply hosepipe with its connector to the coupling on the
machine (No. 6) and the other end should be connected to a suitable
water supply.
3.3 High Pressure Connection
Assemble the Spray Gun (No. 10) and the High Pressure Hose (No.
8) as shown on page 21.
Attach the High Pressure Hose (No. 8) to the High Pressure Outlet
(No. 4) of the unit.
Safety Assurance
As an added precaution, your pressure washer is fitted with a Safety
Lock Device (No. 9) on the Spray Gun.
3.4 Electrical Connection
Ensure the Power Switch (No.3) is in the OFF position before
connecting the factory fitted Plug attached to the Mains Electric Lead
(No.11) into an earthed socket.
If using an Extension Cable make sure it is completely unwound
from the cable drum and is the correct diameter.
To Next Page
Loading...
Need help?
General
