What to do if my Kärcher KM 100/100 R P cannot be started?
If your Kärcher Lawn Sweeper won't start, try the following: Ensure you are sitting on the driver's seat to activate the seat contact switch. Check the fuel tank and oil level, refilling as needed. Inspect the fuses and replace if necessary. Examine the battery and charge it if it's low.
Why does dust gather in my Kärcher Lawn Sweeper?
If dust gathers in your Kärcher Lawn Sweeper, take these steps: Empty the waste container. Check the suction fan drive belt, the sealing cover on the suction fan, and the dust filter (clean or replace as needed). Inspect the filter case seal. Ensure the wet/dry flap is closed and check the sealing strips for wear, adjusting or replacing them as necessary.
How to fix a Kärcher KM 100/100 R P Lawn Sweeper that is not sweeping properly?
If your Kärcher Lawn Sweeper isn't sweeping properly, check the roller brush and side brushes for wear and replace if needed. Also, check the function of the bulk waste flap, the sealing strips for wear (adjust or replace), the belts of the sweeping drive, and ensure the vacuum pressure system is leak-proof.
How to improve vacuum performance on my Kärcher KM 100/100 R P?
To address insufficient vacuum performance in your Kärcher Lawn Sweeper, check the filter case seal, the sealing cover on the suction fan, and the hoses of the suction blower for leaks. Ensure the lamella filter is inserted correctly.
How to improve the cleaning performance at edges of my Kärcher KM 100/100 R P?
If your Kärcher Lawn Sweeper has poor cleaning performance at edges, replace the side brush and check the sealing strips for wear, adjusting or replacing them as required.
What to do if dust gathers in my Kärcher Blower?
If dust gathers in your Kärcher Blower, start by emptying the waste container. Then, check the suction fan drive belt, the sealing cover on the suction fan, the dust filter (clean or replace it), and the filter case seal. Ensure the wet/dry flap is closed and inspect the sealing strips for wear, adjusting or replacing them as needed.
Why is the vacuum performance insufficient in my Kärcher Blower?
To address insufficient vacuum performance in your Kärcher Blower, check the filter case seal and the sealing cover on the suction fan. Inspect the suction blower hoses for leaks. Ensure the lamella filter is correctly inserted.
Why is my Kärcher Blower not sweeping properly?
If your Kärcher Blower is not sweeping properly, check the roller brush and side brushes for wear and replace them if needed. Verify the function of the bulk waste flap. Inspect the sealing strips for wear, adjusting or replacing them as required. Check the belts of the sweeping drive, and ensure the vacuum pressure system is leak-proof.
What to do if the side brush or roller brush switch-on operation is not working on my Kärcher Blower?
If the side brush or roller brush switch-on operation is not working on your Kärcher Blower, check the vacuum pressure system to ensure it is leak-proof.
What to do if the side brush does not turn on my Kärcher Blower?
If the side brush on your Kärcher Blower does not turn, check the fuse.
General| Working Width | 1000 mm |
|---|---|
| Container Volume | 100 L |
| Number of brushes | 2 |
| Adjustable brush height | Yes |
| Wheels | Pneumatic tires |
| Material | Plastic |
| Drive type | Wheel drive |
Covers general safety notes, driving hazards, and tipping dangers.
Specific safety rules for handling liquefied gas and cylinders on the machine.
Procedures for connecting, changing, and handling gas cylinders safely.
Details on correct usage, surfaces, and environmental disposal guidelines.
Identification and description of the main controls on the operator panel.
Steps for unloading, moving the machine, and preparing for startup.
Instructions for starting the engine and refueling for petrol models.
How to operate the driving controls and adjust the driver's seat.
How to select operating modes and start the machine's engine.
Procedures for driving the machine in different directions and using the brakes.
How to engage sweeping modes and drive over obstacles safely.
Guidelines for sweeping different floor types, filter cleaning, and shutting down.
Procedures for transporting, storing, and basic maintenance tasks.
Instructions for cleaning the machine's interior and exterior, with safety notes.
Outlines daily, weekly, and interval-based maintenance performed by the customer.
Detailed steps for specific maintenance tasks like checking filters and tyres.
Step-by-step guide for replacing roller and side brushes.
How to check the sweeping pattern and roller brush wear.
Procedures for adjusting and replacing front, rear, and side sealing strips.
Instructions and safety warnings for replacing the dust filter.
Checks for drive belts, cup seals, and replacement of fuses.
Procedures for checking engine oil, changing oil, and servicing the fuel filter.
Instructions for servicing spark plugs and checking hydraulic oil levels.
Solutions for problems with starting the appliance or slow movement.
Troubleshooting steps for ineffective sweeping and brush problems.
Solutions for issues with vacuum performance and dust collection.
Key technical data for the machine, engine, and fuel types.
Details on battery, oil grades, tyre sizes, and brake systems.
Information on filter systems, vacuum performance, and operating conditions.
Measured noise levels and vibration values for the machine.
Compliance statements, directives, and standards applied to the product.
List of available accessories like brushes, rollers, and filters with part numbers.
To Next Page
