Need help?Do you have a question about the Kärcher KSM 750 BAT and is the answer not in the manual?
General| Working width, brushes | 750 mm |
|---|---|
| Tank fresh/dirt water | 40 / 40 l |
| Area performance theoretical | 3000 m²/h |
| Brush width | 750 mm |
| Vibration level | 2.5 m/s² |
Mandatory safety reading, tip hazards, and environmental protection guidelines.
Guidelines for safe battery handling, charging, and disposal to prevent pollution.
Details on the sweeper's purpose, how it works, and its main components.
Steps for initial setup, operation, and starting the machine.
Information on service schedules, customer maintenance, and cleaning procedures.
List of accessories, spare parts, and guidance for resolving common operational faults.
Key technical data and specifications for the KSM 750 BAT/PROFI/USA model.
Mandatory reading of instructions, checking for damage, and following safety regulations.
Warning about tip hazard on slopes and gradient limitations for safe operation.
Guidance on proper disposal of exhausted batteries and recycling.
Instructions for safely opening and closing the machine's cover, ensuring latch engagement.
Information on the power drive's engine run-down time and avoiding the operating area.
Identification and numbering of key components of the sweeping machine.
Explanation of the throw-over principle, how brushes and container work.
Instructions for unloading, installation, and initial battery charging.
Steps for daily checks including parking brake, battery status, and brush inspection.
Steps to safely start the machine, including master switch settings and parking brake release.
Instructions for starting sweeping, lowering side brush, and machine idling.
Procedures for driving the machine, raising the side broom, and shutting down the engine.
Steps for cleaning the dust filter using the de-duster mechanism.
Instructions for safely removing, emptying, and re-inserting the swept material container.
Warnings against sweeping certain materials and handling coarse-dirt flap.
Guidelines for sweeping dry and moist/wet surfaces for optimal cleaning effect.
Procedures for safely navigating fixed obstacles of various heights.
Instructions for securing the machine during transport.
Procedures for cleaning the machine's interior and exterior surfaces.
Information on using the elapsed-time meter to track maintenance intervals.
Tasks for daily checks and maintenance every 50 operating hours.
Scheduled maintenance tasks performed by customer service at various intervals.
Steps for preparing the machine before performing maintenance tasks.
Procedure for correctly installing and tightening the pushing handle.
Safety instructions for batteries and procedures for mounting the battery.
Instructions for mounting batteries for PROFI and USA models.
Steps and safety precautions for charging the machine's battery.
Identification of fuse load circuit and fuse control circuit for the battery system.
Identification of fuses and relays for PROFI and USA machine models.
Procedure for readjusting the drive system's Bowden cable for uphill tractive force.
Instructions for checking roller wear, replacing it, and adjusting the sweeping range.
Procedure for checking and adjusting the sweep roller's range for optimal cleaning.
Instructions for replacing the side brush and adjusting sweep mirror width/position.
Procedures for replacing front, rear, and side sealing strips for optimal performance.
Procedure for adjusting the coarse-dirt flap's lifting mechanism.
Instructions for readjusting the side brush lowering when bristles wear.
Steps for replacing the dust filter, including safety precautions for fine dust.
List of optional accessories like side brushes and main brushes for different applications.
Guidance on identifying and resolving issues like machine not starting or not sweeping properly.
Detailed specifications including dimensions, weight, speed, engine, and protection class.
Details on fine dust filter surface, utilization classification, and suction system performance.
Information on engine type, voltage, current, power, RPM, and protection class.
Total vibration values for upper limbs according to ISO 5349.
Dimensions, weight, speeds, and capacities for KSM 750 USA and PROFI models.
Operating temperature, humidity, and guaranteed noise emission levels.
Specifications for electric fuse protection and deep-discharge protection.
To Next Page