Why my Kärcher LTR 18-30 Battery does not start?
If your Kärcher Trimmer doesn't start, it might be due to a few reasons. First, ensure the battery pack is correctly inserted until it clicks into place. If that's not the issue, the battery pack could be empty and needs charging. Alternatively, the battery pack might be defective and require replacement.
What to do if my Kärcher LTR 18-30 Battery stops during operation?
If your Kärcher Trimmer stops during operation, consider these potential causes: 1. The string might be too long, overloading the motor. Install the string guard to automatically shorten it. 2. Cutting residue could be blocking the cutting head. Remove any accumulated residue. 3. The motor might be overloaded. Only mow suitable cutting material. 4. The motor or battery may have overheated. Stop working and allow them to cool down.
Defines danger, warning, caution, and attention levels for hazards.
Provides essential safety guidelines for operating power tools.
Specific guidelines for using and maintaining battery-powered tools.
Crucial safety precautions for operating the trimmer outdoors.
General| Type | Push lawn mower |
|---|---|
| Head type | Nylon line |
| Telescopic | Yes |
| Handle type | D-loop handle |
| Cutting width | 300 mm |
| Product color | Black, Silver, Yellow |
| Blade material | Nylon |
| Power source | Battery |
| Charging time | 1.3 h |
| Operating time | 30 min |
| Battery voltage | 18 V |
| AC input voltage | 100 - 240 V |
| Battery capacity | 2.5 Ah |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 315 mm |
|---|---|
| Width | 312 mm |
| Length | 1325 mm |
| Weight | 2500 g |
To Next Page
