What to do if my Kärcher Utility Vehicle appliance cannot be started?
If your Kärcher Utility Vehicle won't start, try the following: First, turn on the main switch. Then, charge or replace the battery. After that, fill the fuel and deaerate the fuel system. Also, clean or replace the fuel filter. Finally, check the fuel pipes, connections, and joints, maintaining them as needed.
Why is the engine running but my Kärcher Utility Vehicle is only moving slowly or not at all?
If the engine of your Kärcher Utility Vehicle is running but the machine is moving slowly or not moving at all, first release the parking brake. If you have a MIC 45 advanced model, pull the hand throttle lever all the way to the rear. Also, check the level of hydraulic fuel.
What to do if the warning lamp for motor temperature lights up on my Kärcher MIC 45 classic Utility Vehicle?
If the warning lamp for motor temperature lights up, it indicates that the engine is overheated. Set the engine speed to idle, clean the radiator, and run the engine at idle until the warning lamp turns off. Also, check the level of cooling liquid in the engine. If the warning lamp does not turn off within 5 minutes, shut off the engine and contact Customer Service.
Why is my Kärcher Utility Vehicle engine running erratically?
If your Kärcher Utility Vehicle engine is running erratically, clean or replace the air filter. Also, check the fuel pipes, connections, and joints, and maintain them if required.
What does it mean if the warning lamp for the battery lights up on my Kärcher MIC 45 classic Utility Vehicle?
If the warning lamp for the battery lights up on your Kärcher Utility Vehicle, it means the battery is not being charged. Call Customer Service.
General| Brand | Kärcher |
|---|---|
| Model | MIC 45 classic |
| Category | Utility Vehicle |
| Language | English |
To Next Page
