Kärcher PUZZI 400 E - Page 12

English Puzzi 400 E 12
AFTER OPERATION
Storage
¾ Turn the heater switch off
¾ Remove unused cleaning fluids
from the housing with suction hose
¾ Remove the floor nozzle and hold
suction hose in a fresh-water tank.
Switch on suction switch. The
cleaning fluid removed by suction
is collected in the dirty-water tank
¾ Empty the dirty-water tank
¾ Fill the fresh-water tank with 5 l of
clean water
¾ Switch on spray switch
¾ Actuate the valve handle and rinse
the unit thoroughly for
approx. 2 min..
¾ Switch off unit and pull the power
plug.
CARE AND MAINTENANCE
Service agreement:
A maintenance contract for this unit
can be signed with a Kärcher
authorised dealer.
¾ Remove the cover
Unscrew the (1) float
Clean the (2) fluff strainer
Clean the (1) fresh water strainer
Clean the float switch (2)
Unscrew the union nut
Clean the nozzle snout (1)