Kärcher SC 1402 Quick Reference

20 English
When you unpack the system, check that
everything is complete (see page 3). If the-
re are any missing parts or you detect any
transport damage when unpacking, please
inform your dealer immediately.
Î Place the manual nozzle (E1) into the
appropriate accessory compartment
(see Fig. 1).
Note: The detail nozzle (D1), the exten-
sion piece (D2), the round brush (D3),
and the power nozzle (D4) are already
stored.
Figure 1
Î Hold the unlocking button down, and
push the parking device (G3) on an ex-
tension tube (G1) until it locks into place
in the second aperture. The parking de-
vice must lock into place when you re-
lease the unlocking button (see Fig. 2).
Figure 2
Î Put the floor nozzle (H1) on the extensi-
on piece with the parking device.
Î Insert the window nozzle (F1) on the se-
cond extension piece.
Î Put the extension pieces into the large
accessory compartments (see Fig. 3).
Figure 3
If you interrupt your work for a short period
of time, the extension tube with the floor
nozzle can be put into the parking position
(see Figure 4).
Figure 4
Preparing the Appliance
Unpacking the Appliance
The packaging materials are
recyclable. Please do not throw
packaging in the domestic wa-
ste but pass it on for recycling.
Old units contain valuable re-
cyclable materials. Batteries,
oil and similar substances may
not be released into the envi-
ronment. Therefore please dis-
pose of old units through
suitable collection systems.
Storing the Accessories
Putting Down the Accessories

Kärcher SC 1402 Specifications

General

Type	Cylinder steam cleaner
Capacity	1.6 L
Dimensions (WxDxH)	420 x 340 x 412 mm
Steam pressure	3.5 bar

Weight and Dimensions

Weight	6200 g