– 12
Often, failures have simple causes and you
can do the troubleshooting yourself using
the following overview. If you are in doubt
or if the failure is not listed here please con-
tact the authorized customer service.
Danger
Always disconnect the mains plug and al-
low the steam cleaner to cool down before
performing any maintenance work.
Repair works may only be performed by the
authorized customer service.
Descale the steam boiler.
Turn off the appliance.
See “Refilling Water” Page 9
Steam switch is secured with the lock /
child-proof lock.
Move the selector switch for the steam
volume to the front.
Press the steam gun until less water is
emitted.
Descale the steam boiler.
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
(See address on the reverse)
Subject to technical modifications!
Troubleshooting
Long heating-up time
Steam boiler is decalcified.
No steam
No water in the steam boiler.
Steam lever cannot be pressed
anymore
High water output
Steam chamber too full.
Steam boiler is decalcified.
Spare parts
Warranty
Technical specifications
Power connection
Voltage 220-240 V
1~50/60 Hz
Protective class I
Protection class IPX4
Performance data
Heating output 1800 W
Heating output steam
iron
750 W
Operating pressure max. 0,35 MPa
Heating time 6 Minutes
Max. steam quantity 40 g/min
Dimensions
Boiler capacity 1,0 l
Weight (without acces-
sories)
3,1 kg
Width 250 mm
Length 382 mm
Height 256 mm
20 EN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
