Kärcher SC 3 EasyFix User Manual

English 13
switches off and the red water shortage
indicator light flashes.
To be able to operate the device again,
the device has to be switched off and
back on again. In the process, you
must make sure that the cartridge has
been inserted correctly and there is
enough water in the water reservoir.
1. Fill the water reservoir with a maxi-
mum of 1 l of tap water through th
e
cover of the decalcification car-
tridge.
The red water shortage indicator
light goes out.
Interrupting operation
In order to save energy, we recom-
mend that you switch off the device for
operating breaks longer than 20 min-
utes.
1. Press the OFF switch.
Switching off the device
1. Press the OFF switch.
The device is switched off.
2. Press the steam lever until no more
steam flows out.
The steam boiler is depressurized.
3. Set the child lock (selector switch f
or
steam volume) to the rear.
The steam lever is locked.
4. Pull the mains plug out of the socket.
ATTENTION
Device damage due to water putre-
faction
If the device is not put into operation for
more than 2 months, the water in the
tank may putrefy.
Drain the water reservoir before breaks
in operation.
5. Drain the water reservoir.

Kärcher SC 3 EasyFix Specifications

General

AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Type	Cylinder steam cleaner
Capacity	1 L
Hose length	2 m
Product color	Black, Yellow
International Protection (IP) code	IPX4
Ready time	0.5 min
Steam pressure	3.5 bar
Adjustable steam	Yes
Cleaning surfaces	Glass, Hard floor, Tiles
Continuous steam performance	40 g/min

Weight and Dimensions

Depth	360 mm
Width	236 mm
Height	253 mm
Weight	3100 g