English 7
strength. ● Clean tiled walls
with sockets carefully. ● Discon-
nect the device from the mains
during longer operating breaks,
after use or before performing
any maintenance work. ● Only
carry out servicing work when
the mains plug is pulled and the
steam cleaner has cooled down.
Operation
DANGER ● Operation in explo-
sive atmospheres is prohibited.
● When using the device in haz-
ard zones (e.g. service stations),
adhere to the respective safety
regulations.
WARNING ● Risk of scalding.
Let the appliance and accessory
parts, particularly the floor
cleaning cloth and the hand cov-
er cool down before touching
them. ● Risk of scalding. Do not
use the appliance for cleaning
pressure tanks as this poses a
bursting and explosion hazard.
● Risk of scalding from the floor
nozzle. Ensure that no part of
the body gets under the floor
nozzle. Never operated the floor
nozzle without wearing shoes.
● Risk of scalding. Only operate
the appliance once it is fully as-
sembled and functional. ● Risk
of scalding. Let the appliance
cool down fully before putting it
away. ● Never disconnect ac-
cessories from the device while
steam is being expelled. ● Hot
water may drip out when discon-
necting accessory parts. Allow
the device to cool down first.
● Never open the maintenance /
safety lock during operation. Al-
low the device to cool down first.
● Do not clamp the steam lever /
steam key during operation.
● Replace a damaged steam
hose immediately with a steam
hose as recommended by the
manufacturer. ● Do not steam
any objects which contain harm-
ful substances (e.g. asbestos).
CAUTION ● Only operate or
store the device in accordance
with the description or figure.
● Check the device and the ac-
cessories, in particular the pow-
er supply cable, safety lock and
steam hose, to make sure it is in
proper safe and reliable condi-
tion before operation each time.
Do not use the device if it is
damaged. Replace damaged
components immediately. ● On-
ly switch on the device when wa-
ter is present in the steam boiler.
The device may otherwise over-
heat, see the T
roubleshooting
chapter of the operating instruc-
tions. ● Accidents or damage
due to the device falling over.
Before all actions with or on the
device, you must make sure that
it is stable.
ATTENTION ● Do not fill with
any cleaning agents or other
supplements. ● Do not operate
To Next Page
Loading...
