English 11
To store the TV1 Indoor Wet & Dry
Vac, first wrap the cord around the
base. Then place the TV1 Indoor Wet
& Dry Vac indoors in a cool dry place.
Do not use abrasives, glass or
universal cleaners! Never immerse
the appliance in water.
● Clean the appliance and accessory
parts made of plastic with a
commercial plastic cleaner.
● If required, rinse the container and
accessories with water properly and
dry them before reuse.
Often, failures have simple causes
and you can do the troubleshooting
yourself using the following overview.
If you are in doubt or if the failure is
not listed here please contact the
authorized customer service.
Turn off the appliance and remove
the mains plug prior to any care
and maintenance work.
Repair works may only be
performed by the authorized
customer service.
Check the following points:
● Accessories, suction hose or suction
pipes are clogged, please remove the
obstruction.
● If the hose is clogged, remove it by
twisting the connection on the TV1
Indoor Wet & Dry Vac, then lifting up.
● Dirt Container is full: Empty the Dirt
Container.
Maintenance
Storing the TV1 Indoor
Wet & Dry Vac
Cleaning the TV1 Indoor
Wet & Dry Vac
Troubleshooting
To Next Page
Loading...
