Kärcher VC 6 User Manual

– 7
 Turn off the appliance and disconnect the mains
plug.
Illustration
 Push the take-up cable button. The cable will pull it-
self automatically into the appliance.
 Hang the floor nozzle on the backside of the appli-
ance into the parking holder, and push into the
pause position.
 Hold the appliance at the carrying handle when you
want to transport it and store it in dry rooms.
Note: It is recommended that you first completely
push in the telescopic suction pipe.
 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 Clean the dust chamber with a dry wipe cloth/ dust
brush.
Order no. 6.904-329
Contents: 5 filter bags with cap and 1 engine protection
filter.
Note
Separate the telescopic suction pipe from the handle to
read the filter change indicator.
Illustration
 If the filter change indicator in the cover glows red,
then please change the filter bag.
 Use the closing lever and open the lid.
Illustration
 Unlock the holder of the filter bags and pull towards
the outside.
Illustration
 Close the filter bag using the closing flap, remove
the filter bag and dispose it off.
Illustration
 Push the new filter bag into the support until the
stop. First press the flap downwards; then push the
holder into the casing and lock it at the appliance
casing.
Motor protection filter: change before the last filter
bag is removed from the filter bag package.
 The motor protection filter is behind the inserted fil-
ter bag. Change the motor protection filter before
you insert the filter bag.
Illustration
 Unlock the frame and remove.
 Remove the lower part of the frame, take out old
engine protection filter and dispose it off. Insert the
new engine protection filter in the frame and re-
place the lower part of the frame.
Illustration
 Insert and click the frame into its place.
Order no. 6.414-805
Filter for pure blower air.
HEPA filter *: Change once a year.
Illustration
 Open cover.
 Unlock the HEPA filter and remove.
Illustration
 Insert the new HEPA filter and click it into place.
 Close the lid.
* EN1822:1998
Clean the switchable floor nozzle at reglular intervals!
 Remove the nozzle from the suction pipe.
Illustration
 Handle and suction tube can be disconnected in or-
der to clean or if clogged. Push the 2 interlocks and
pull apart.
 Connect handle and suction tube and insert.
Subject to technical modifications!
Finish operation
Transport, storage
Care and maintenance
Cleaning the device
Replacing the filter bag
Change the motor protection filter
Replace HEPA filter
Cleaning the floor nozzle
Cleaning the accessories
Technical specifications
Kärcher VC 6
Sound power level L
WA
74 dB(A)
Rated power input 600 W
10 EN

Kärcher VC 6 Specifications

General

AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Maximum input power	600 W
Annual energy consumption	- kWh
Type	Cylinder vacuum
Dust capacity	4 L
Product color	Yellow
Tube material	-
Dust container type	Dust bag
Proper use	Home
Noise level	72 dB
Cleaning surfaces	Carpet, Hard floor
Vacuum air filtering	HEPA
Dirt separating method	Filtering

Weight and Dimensions

Depth	383 mm
Width	370 mm
Height	373 mm
Weight	6600 g